Electric optical fiber polarization controller
Manual optical fiber polarization controller
Electric optical fiber polarization controller
Manual optical fiber polarization controller
Principle: The optical fiber polarization controller generates stress birefringence by winding the optical fiber around two or three circular discs, thereby forming independent wave plates and changing the polarization state of the light transmitted in the single-mode optical fiber. The fast axis of the optical fiber is located within the plane of the winding disk, so the polarization state of any input light can be adjusted by rotating the paddle.
Functional characteristics
Realize the conversion among linear polarization state, circular polarization state and elliptical polarization state.
It operates over the entire optical fiber bandwidth range.
Empty controller for Ø900 µm sheathed FC/PC or FC/APC fiber patch cords.
Controller with pre-installed optical fiber, optical fiber with FC/PC or FC/APC connectors (2.0mm narrow key).
Three types of winding coil diameters:
Three-paddle controller: Ø1.06 inches or Ø2.2 inches
Double-paddle controller: Ø0.71 inches
Customer service
Our company can provide the fiber-free version controller.
It is convenient for users to insert single-mode optical fibers with Ø900 µm shears.
Or FC/PC or FC/APC optical fiber patch cords.
To ensure the correct use of the controller,
The optical fiber patch cord must be long enough to reach the recommended number of turns.